Overhaul TRD 2-way Limited Slip Differential (LSD) for Toyota Corolla AE86 Levin / Trueno

Overhaul TRD 2-way Limited Slip Differential (LSD) for Toyota Corolla AE86 Levin / Trueno

12th April 2004 Monday

Part 3 of 4

Removing the clutches / plates one by one carefully, remembering it's face direction and sequence. Each plate is removed and flipped upside down, so that the entire removed stack may be flipped back up right. Like flipping over pages of a book one by one then turn the whole thing over after reading it.

1st - Cone shaped spring / washer - notice 4 outer legs / corners

2nd - washer - notice the smaller shiny one in the center - notice without it, it exposed the LSD unit's to 4 segment.

3rd - Cone shaped spring / washer - notice 4 inner legs / corners - slightly blocking some part of the previous washer. Notice the 1st LSD clutch is now exposed showing it's 4 legs and perpendicular oil groves.

4th - LSD clutch no. 1 - notice with outer legs and perpendicular oil groves. This means both sides are stamped with oil groves. The 2nd LSD clutch is exposed showing it's circular_off-set oil groves.

5th - LSD clutch no. 2 - notice with inner legs and circular_off-set oil groves. Again both sides are stamped with oil groves. The 3rd LSD clutch is exposed with outer legs and looks like the 1st clutch.

6th - So, this 3rd LSD clutch is like the 1st.

7th - Finally the last LSD clutch no. 4 is like the 2nd. Notice some circular_off-set oil groves on the LSD unit. Those are only oil marks. That surface is flat, to be seen more clearly later.

ACOUSTICS SECTION AUDIO SECTION CAR SECTION

HOME - Technical Website for Acoustics, Audio and Car

Malaysia Boleh

Hit Counter