Restoration 2

Installing Engine

Project 1 failed 29th November 2001 - May 2002

Project 2 began on 9th September 2002

Now is 15th October 2002

Today is a big day for my car, as well as myself. Today the engine goes in :)

 

The cold water inlet guide housing the fan switch is not from this engine, but the one modified, fan switch location moved to clear the fire wall from the 1st project. Please look carefully on the picture above.

Ahhhhhhhhhhhhhhh, ain't it nice :))))))))))))))))))))))))))))))))))

I forgot to mention, hehehehhe, the engine was released from all mountings including the T50 gearbox to make way for a EFI wiring loom to turn / move / switch position of route :( what a drag working on small cars :P

 

  1. Restoration 2

  2. Bodyworks Repair

  3. Installing Dashboard

  4. Install Dash Frame & Clean Engine Bay

  5. Clean Engine Bay 2

  6. Engine Bay Cleaned

  7. Anti-rust Engine Bay

  8. Painting Engine Bay

  9. Installing Wiring Looms

  10. Other Ancillaries

  11. Installing Engine

  12. Other Ancillaries 2

  13. Extending Wiring Looms

  14. Nearly Finished

  15. The Car Starts

 

ACOUSTICS SECTION             AUDIO SECTION             CAR SECTION

HOME - Technical Website for Acoustics, Audio and Car

  Malaysia Boleh 

 

Hit Counter