Another Anechoic Chamber Example

16th November 2005

This anechoic chamber has sufficient volume & dimension over cost investment. Around 3 m high. The wedges are around 1 meter long each. Very very good.

There are some left over items, while measurement taken. That is a bad practice. They are very near to the mic too. The thin wire mesh laid on top of the strong frame is loose and vibrating at certain times. Not so good for low frequency measurement. It may be excited and create unwanted noise.

1. Another Anechoic Chamber Example
2. IEC baffle in Anechoic Chamber
3. Setting up speakers & mic in Anechoic Chamber
4. Good long wedges but bad practice

ACOUSTICS SECTION             AUDIO SECTION             CAR SECTION

HOME - Technical Website for Acoustics, Audio and Car

  Malaysia Boleh