Plug Snap but JB Weld still holds

4th November 2005

The spark plug thread was broken and glued back using JB Weld. It was then abused again to see if it would come off. We throw it on the floor many times. We try to bend it by hand. Finally we use a big hammer to beat it many times. Finally it broke. After careful checking it is found that the park which broke is the white stone thingy and not the glue part. JB Weld rocks :)

ACOUSTICS SECTION             AUDIO SECTION             CAR SECTION

HOME - Technical Website for Acoustics, Audio and Car

  Malaysia Boleh